DirecTV Remote Control

"Looking For Easy To Follow DirecTV Remote Control Guide?"

You can use different types of remote control to control the setting and operation of the Direct TV receiver, DVD and VCD in your house within 20 feet distance of your equipment.

With the remote control, you can sit relax in your sofa set without moving and still control all the equipments :)

If you have a universal Remote Control, you can use the same unit of remote control to control all of the equipment units, so that your coffee table will not full of remote control sets :-)

I am going to share with you on how to setup your RC64 Remote control here:-

1. You need to locate the Direct TV Receiver brand and model number which located at the back or bottom panel of the receiver itself and write it down.

2. Locate the 5 digit code for your Direct TV receiver.

3. Power on the Direct TV Receiver.

4. Slide the "MODE" switch to the DirecTV position.

5. Press and hold the "MUTE" and "SELECT" key until the greenlight under the DirecTV position flashes twice, then release both keys.

6. Using the number keys, enter the 5 digit code. If performed correctly, the green light under the DirecTV position flashes twice.

7. Aim your Remote Control at the Direct TV Receiver and press the PWR key once, the Receiver shall turn off. If not, repeat steps 3 and 4, trying each code for your brand until you find the correct code.

You can check out more DirecTV Remote Control Manual here

Yes, please send me my FREE Insider Direct TV Guide now!

Return to Direct TV Equipment

Return to top of page